Request Information
  • Designed to fit small hub diameters
  • Tapered design allows for accurate shaft to hub alignement
  • Available in metric sizes from: 5mm - 100mm


    • For selection and application see Technical Notes download
    Unit of Measure

    Specifications

    Inside Diameter_SYN

    		 N/A 0.276 in

    t1 - Shaft Dia. Tolerance

    		 N/A -0.0009 in +0

    Outside Diameter_SYN

    		 N/A 0.472 in

    t2 - Hub Counter ID Tolerance

    		 N/A +0.0011 in -0

    L

    		 N/A 0.394 in

    Mountable Thickness_SYN

    		 N/A 0.748 in

    Thickness_SYN

    		 N/A 0.827 in

    Total Length_SYN

    		 N/A 0.945 in

    Flange Outside Diameter_SYN

    		 N/A 0.984 in

    D2

    		 N/A 0.886 in

    Torque_SYN

    		 N/A 10 ft·lb

    Transmissible Thrust

    		 N/A 849 lb

    Shaft Working Pressure_SYN

    		 N/A 23206 psi

    Hub Working Pressure_SYN

    		 N/A 13489 psi

    Weight_SYN

    		 N/A 0.100 lb

    Locking Bolts

    Number of Screws_SYN

    		 N/A 3

    Bolt Size_SYN

    		 N/A M3x10

    Screw Seating Torque_SYN

    		 N/A 2.000 ft·lb

    Features & Application

    Features & Application

    		 N/A
    • Same Inner and Outer Diameters as the EL Series
      Designed with the same inner and outer diameters as an EL Series POWER-LOCK.
    • Self-Centering
      These units provide accurate shaft-hub alignment and concentricity, allowing straight bore mounting.
    • Simple Construction
      Constructed with only an inner and an outer ring and locking bolts. Simply tighten these bolts to achieve a completely secure connection.