BR-HT is mainly used in backstop applications as an integral part of a gear reducer. Prevention of reverse rotation for inclined conveyor and bucket elevator are typical application BR-HT assures not only the immediate backstop function under high torque, but also long service life by the “lift-off” design. In addition, installation on the high speed shaft with low torque enables selection of more compact models with resulting lower cost.
Unit of Measure
Specifications
UPC Code |
N/A 097039688705 |
Torque |
N/A 162263.2 lb·ft220000.0 N·m |
Inner Race Overrunning [Min] |
N/A 190 rpm |
Inner Race Overrunning [Max] |
N/A 1000 rpm |
Engagement [Max] |
N/A 100 rpm |
Bore Size |
N/A 10.236 in260.00 mm |
Width |
N/A 9.843 in250.00 mm |
B1 |
N/A 9.843 in250.00 mm |
Outside Diameter |
N/A 22.835 in580.00 mm |
D |
N/A 16.929 in430.00 mm |
E |
N/A 14.291 in363.00 mm |
Bolt Circle Diameter |
N/A 19.685 in500.00 mm |
Q-R Mounting Holes Quantity - Size |
N/A 24-M30 |
S-T Removed Holes Quantity - Size |
N/A 2-M30 |
F |
N/A 6.850 in174.00 mm |
Weight |
N/A 710.600 lb323.000 kg |
H |
N/A 15.748 in400.00 mm |
M |
N/A 1.417 in36.00 mm |
N |
N/A 0.118 in3.00 mm |
