Tsubaki Brasil Equipamentos Industriais LTDA
Rua Dom Bernardo Nogueira, 55
CEP 04134-000
São Paulo, SP

Telefone: 55-11-3253-5656
E-mail: tsubaki@tsubaki.ind.br
Website: tsubaki.ind.br
Print Back
BR-HT is mainly used in backstop applications as an integral part of a gear reducer. Prevention of reverse rotation for inclined conveyor and bucket elevator are typical application BR-HT assures not only the immediate backstop function under high torque, but also long service life by the “lift-off” design. In addition, installation on the high speed shaft with low torque enables selection of more compact models with resulting lower cost.
Unit of Measure

Specifications

UPC Code

 N/A 097039688705

Torque

 N/A 162263.2 lb·ft220000.0 N·m

Inner Race Overrunning [Min]

 N/A 190 rpm

Inner Race Overrunning [Max]

 N/A 1000 rpm

Engagement [Max]

 N/A 100 rpm

Bore Size

 N/A 10.236 in260.00 mm

Width

 N/A 9.843 in250.00 mm

B1

 N/A 9.843 in250.00 mm

Outside Diameter

 N/A 22.835 in580.00 mm

D

 N/A 16.929 in430.00 mm

E

 N/A 14.291 in363.00 mm

Bolt Circle Diameter

 N/A 19.685 in500.00 mm

Q-R Mounting Holes Quantity - Size

 N/A 24-M30

S-T Removed Holes Quantity - Size

 N/A 2-M30

F

 N/A 6.850 in174.00 mm

Weight

 N/A 710.600 lb323.000 kg

H

 N/A 15.748 in400.00 mm

M

 N/A 1.417 in36.00 mm

N

 N/A 0.118 in3.00 mm