• Does not damage conveyed materials
  • Transfers materials smoothly to other lines
  • Wide selection available in a variety of designs
  • Easy to assemble and disassemble
  • RT type Roller Table chain provides a low friction alternative to table top chain
  • ST type Roller Table chain allows your product to be loaded and unloaded at right angles to the conveyor flow
  • Standard sprockets can be used

Maximum allowable conveying load varies depending upon the width of the roller table and the machine length.
Please use sprockets that have more than 23 teeth.
Stay pin (pin does not rotate) Plastic roller (gray)
Both sides of chain: stainless steel
Request Information
Unit of Measure
Items
Roller Table RT type

Roller Table RT Type
Roller Table RT type

Roller Table RT Type
Roller Table RT type

Roller Table RT Type
Roller Table RT type

Roller Table RT Type
Roller Table RT type

Roller Table RT Type
Chain Pitch_SYN N/A 0.500 in N/A 0.500 in N/A 0.500 in N/A 0.500 in N/A 0.625 in
Inside Width_SYN1 N/A 0.313 in N/A 0.313 in N/A 0.313 in N/A 0.313 in N/A 0.375 in
Roller Diameter_SYN N/A 0.313 in N/A 0.313 in N/A 0.313 in N/A 0.313 in N/A 0.400 in
Link Plate Height_SYN N/A 0.437 in N/A 0.437 in N/A 0.437 in N/A 0.437 in N/A 0.547 in
Link Plate Thickness_SYN N/A 0.059 in N/A 0.059 in N/A 0.059 in N/A 0.059 in N/A 0.079 in
Pin Diameter_SYN N/A 0.154 in N/A 0.154 in N/A 0.154 in N/A 0.154 in N/A 0.200 in
Pin Overall Length_SYN N/A 5.339 in N/A 9.276 in N/A 13.213 in N/A 17.150 in N/A 5.622 in
R2 - Plastic Roller Diameter N/A 0.480 in N/A 0.480 in N/A 0.480 in N/A 0.480 in N/A 0.598 in
L2 N/A 1.969 in
C1 N/A 3.984 in N/A 7.921 in N/A 11.858 in N/A 15.795 in N/A 3.984 in
C3 N/A 4.551 in N/A 8.488 in N/A 12.425 in N/A 16.362 in N/A 4.685 in
Maximum Allowable Conveying Load N/A 41 lb/ft² N/A 41 lb/ft² N/A 41 lb/ft² N/A 41 lb/ft² N/A 61 lb/ft²
  • 1 Width between roller link plates (W) is slightly narrower than ANSI standard, however this chain runs on standard sprockets.