Request Information
  • Does not damage conveyed materials
  • Transfers materials smoothly to other lines
  • Wide selection available in a variety of designs
  • Easy to assemble and disassemble
  • RT type Roller Table chain provides a low friction alternative to table top chain
  • ST type Roller Table chain allows your product to be loaded and unloaded at right angles to the conveyor flow
  • Standard sprockets can be used

Maximum allowable conveying load varies depending upon the width of the roller table and the machine length.
Please use sprockets that have more than 23 teeth.
Stay pin (pin does not rotate) Plastic roller (gray)
Both sides of chain: stainless steel
Unit of Measure

Specifications

Chain Pitch_SYN

 N/A 0.500 in
Inside Width_SYN1 N/A 0.313 in

Roller Diameter_SYN

 N/A 0.313 in

C1

 N/A 3.984 in

C3

 N/A 4.551 in

Maximum Allowable Conveying Load

 N/A 41 lb/ft²

Link Plate

Link Plate Height_SYN

 N/A 0.437 in

Link Plate Thickness_SYN

 N/A 0.059 in

Pin Specifications

Pin Diameter_SYN

 N/A 0.154 in

Pin Overall Length_SYN

 N/A 5.339 in

Plastic Roller Specifications

R2 - Plastic Roller Diameter

 N/A 0.480 in

L2

 N/A 1.969 in
  • 1 Width between roller link plates (W) is slightly narrower than ANSI standard, however this chain runs on standard sprockets.