NICKEL-PLATED CHAIN
Nickel-Plated chains provide acceptable performance where equipment must operate in mildly corrosive environments.
Double strand nickel-plated chains are also available.
Request Information
Unit of Measure
Items
British Standard Chains

British Standard Nickel-Plated Chains
British Standard Chains

British Standard Nickel-Plated Chains
British Standard Chains

British Standard Nickel-Plated Chains
British Standard Chains

British Standard Nickel-Plated Chains
British Standard Chains

British Standard Nickel-Plated Chains
Chain Type_SYN N/A Single
Material_SYN N/A Nickel-Plated
Chain Number_SYN N/A 06B N/A 08B N/A 10B N/A 12B N/A 16B
Chain Pitch_SYN N/A 0.375 in N/A 0.500 in N/A 0.625 in N/A 0.750 in N/A 1.000 in
Roller Diameter_SYN N/A 0.250 in N/A 0.335 in N/A 0.400 in N/A 0.475 in N/A 0.625 in
Inside Width_SYN1 N/A 0.225 in N/A 0.305 in N/A 0.380 in N/A 0.460 in N/A 0.670 in
Pin Diameter_SYN N/A 0.129 in N/A 0.175 in N/A 0.200 in N/A 0.225 in N/A 0.326 in
L1 N/A 0.255 in N/A 0.329 in N/A 0.370 in N/A 0.433 in N/A 0.705 in
L2 N/A 0.296 in N/A 0.395 in N/A 0.449 in N/A 0.520 in N/A 0.783 in
Link Plate Height_SYN N/A 0.323 in N/A 0.465 in N/A 0.579 in N/A 0.634 in N/A 0.827 in
Average Tensile Strength N/A 2310 lb N/A 4410 lb N/A 5840 lb N/A 7500 lb N/A 16500 lb
Bearing Area (Nominal) N/A 0.040 in² N/A 0.078 in² N/A 0.104 in² N/A 0.138 in² N/A 0.326 in²
  • 1 Width between roller link plates (W) is slightly narrower than ANSI standard, however this chain runs on standard sprockets.