Tsubaki Brasil Equipamentos Industriais LTDA
Rua Dom Bernardo Nogueira, 55
CEP 04134-000
São Paulo, SP

Telefone: 55-11-3253-5656
E-mail: tsubaki@tsubaki.ind.br
Website: tsubaki.ind.br
Print Back
Metric bore sizes are available upon request.

Steel or stainless steel bushings are available on a quoted basis. Please contact us for pricing.
Unit of Measure

Specifications

Bushing Series_SYN

 N/A 5050

A

 N/A 7.000 in

Overall Length_SYN

 N/A 5.000 in

Bolt Circle Diameter_SYN

 N/A 6.720 in
Cap Screw Size_SYN1 N/A 7/8 x 2 1/4 in

G Angle

 N/A 37 °
L - Standard Key2 N/A 2.313 in
L - Short Hex Key3 N/A 2.813 in
M - Key4 N/A 4.813 in
M - Short Hex Key5 N/A 5.250 in

Weight_SYN

 N/A 32.000 lb
  • 1 3 Required
  • 2 Space required to tighten bushing. Also space required to loosen screws to permit removal of hub by puller.
    Standard hex key cut to minimum usable length.
  • 3 Space required to tighten bushing. Also space required to loosen screws to permit removal of hub by puller.
    Standard hex key cut to minimum usable length.
  • 4 Space required to remove bushing using jackscrews - no puller required.
    Standard hex key cut to minimum usable length.
  • 5 Space required to remove bushing using jackscrews — no puller required.
    Standard hex key cut to minimum usable length.