Tsubaki Brasil Equipamentos Industriais LTDA
Rua Dom Bernardo Nogueira, 55
CEP 04134-000
São Paulo, SP

Telefone: 55-11-3253-5656
E-mail: tsubaki@tsubaki.ind.br
Website: tsubaki.ind.br
Print Back
  • Does not damage conveyed materials
  • Transfers materials smoothly to other lines
  • Wide selection available in a variety of designs
  • Easy to assemble and disassemble
  • RT type Roller Table chain provides a low friction alternative to table top chain
  • ST type Roller Table chain allows your product to be loaded and unloaded at right angles to the conveyor flow
  • Standard sprockets can be used

Maximum allowable conveying load varies depending upon the width of the roller table and the machine length.
Please use sprockets that have more than 23 teeth.
The special attachment is bent to height of roller
Plastic roller (gray)
Stay pin (pin does not rotate)
Unit of Measure

Common Dimensions

Chain Pitch_SYN

 N/A 0.500 in
Inside Width_SYN1 N/A 0.313 in

Roller Diameter_SYN

 N/A 0.313 in

h1 - Attachment Height

 N/A 0.224 in

h2 - Link Plate Height

 N/A 0.276 in

N

 N/A 0.961 in

T1

 N/A 0.047 in

T2

 N/A 0.059 in

d1 - Pin Diameter

 N/A 0.154 in

R2 - Plastic Roller Diameter

 N/A 0.472 in

L2

 N/A 0.984 in

Maximum Allowable Conveying Load

 N/A 51 lb/ft²

Specifications

C1

 N/A 13.827 in

C2

 N/A 15.276 in

C3

 N/A 14.393 in

L1

 N/A 15.181 in
  • 1 Width between roller link plates (W) is slightly narrower than ANSI standard, however this chain runs on standard sprockets.