Tsubaki Brasil Equipamentos Industriais LTDA
Rua Dom Bernardo Nogueira, 55
CEP 04134-000
São Paulo, SP

Telefone: 55-11-3253-5656
E-mail: tsubaki@tsubaki.ind.br
Website: tsubaki.ind.br
Print Back
  • Does not damage conveyed materials
  • Transfers materials smoothly to other lines
  • Wide selection available in a variety of designs
  • Easy to assemble and disassemble
  • RT type Roller Table chain provides a low friction alternative to table top chain
  • ST type Roller Table chain allows your product to be loaded and unloaded at right angles to the conveyor flow
  • Standard sprockets can be used

Maximum allowable conveying load varies depending upon the width of the roller table and the machine length.
Please use sprockets that have more than 23 teeth.
Stay pin (pin does not rotate) Plastic roller (gray)
Both sides of chain: stainless steel
Unit of Measure

Specifications

Chain Pitch_SYN

 N/A 0.750 in
Inside Width_SYN1 N/A 0.500 in

Roller Diameter_SYN

 N/A 0.469 in

C1

 N/A 7.921 in

C3

 N/A 8.819 in

Maximum Allowable Conveying Load

 N/A 61 lb/ft²

Link Plate

Link Plate Height_SYN

 N/A 0.661 in

Link Plate Thickness_SYN

 N/A 0.094 in

Pin Specifications

Pin Diameter_SYN

 N/A 0.235 in

Pin Overall Length_SYN

 N/A 9.984 in

Plastic Roller Specifications

R2 - Plastic Roller Diameter

 N/A 0.720 in

L2

 N/A 1.969 in
  • 1 Width between roller link plates (W) is slightly narrower than ANSI standard, however this chain runs on standard sprockets.