Print Back
  • Most popular series world-wide
  • Easy machining of shaft and hub
  • Can use on shafts with a keyway
  • Metric size range: 19-mm thru 300-mm


For selection and application see Technical Notes download
Unit of Measure

Specifications

Inside Diameter_SYN

N/A 0.984 in

t1 - Shaft Dia. Tolerance

N/A -0.0013 in +0

Outside Diameter_SYN

N/A 1.969 in

t2 - Hub Counter ID Tolerance

N/A +0.0015 in -0

Thickness_SYN

N/A 0.787 in

L

N/A 0.709 in

Total Length_SYN

N/A 1.024 in

Torque_SYN

N/A 311 ft·lb

Transmissible Thrust

N/A 7480 lb

Shaft Working Pressure_SYN

N/A 29443 psi

Hub Working Pressure_SYN

N/A 14649 psi

Weight_SYN

N/A 0.500 lb

UPC Code

N/A 097039579966

Locking Bolts

Number of Screws_SYN

N/A 8

Bolt Size_SYN

N/A M6x18

Screw Seating Torque_SYN

N/A 12.500 ft·lb

Features & Application

Features & Application

N/A
  • Multipurpose
    Ideally structured and highly reliable locking device
  • Low Machining Costs
    Keyway, splines, presses and thermal fittings are not required. Optimum performance is achieved with low shaft and hub tolerances minimizing the total machining costs.
  • Easy to Install
    Install or removes just by tightening or loosening of bolts. No need to hassle with adjusting keyways and thermal fittings.
  • Options to Fit Every Application
    Stainless Steel and electroless nickle plating options are offered for standard models. Both are highly durable in corrosive or clean room environments.