Tsubaki Brasil Equipamentos Industriais LTDA
Rua Dom Bernardo Nogueira, 55
CEP 04134-000
São Paulo, SP

Telefone: 55-11-3253-5656
E-mail: tsubaki@tsubaki.ind.br
Website: tsubaki.ind.br
Print Back
  • Most popular series world-wide
  • Easy machining of shaft and hub
  • Can use on shafts with a keyway
  • Inch size range: 3/4" thru 11-13/16"


For selection and application see Technical Notes download
Unit of Measure

Specifications

Inside Diameter_SYN

 N/A 2.625 in

t1 - Shaft Dia. Tolerance

 N/A -0.0018 in +0

Outside Diameter_SYN

 N/A 4.337 in

t2 - Hub Counter ID Tolerance

 N/A +0.0021 in -0

Thickness_SYN

 N/A 1.073 in

L

 N/A 0.984 in

Total Length_SYN

 N/A 1.467 in

Torque_SYN

 N/A 3400 ft·lb

Transmissible Thrust

 N/A 31020 lb

Shaft Working Pressure_SYN

 N/A 31940 psi

Hub Working Pressure_SYN

 N/A 19340 psi

Weight_SYN

 N/A 2.900 lb

UPC Code

 N/A 097039730749

Locking Bolts

Number of Screws_SYN

 N/A 11

Bolt Size_SYN

 N/A M10x25

Screw Seating Torque_SYN

 N/A 60.000 ft·lb

Features & Application

Features & Application

 N/A
  • Multipurpose
    Ideally structured and highly reliable locking device
  • Low Machining Costs
    Keyway, splines, presses and thermal fittings are not required. Optimum performance is achieved with low shaft and hub tolerances minimizing the total machining costs.
  • Easy to Install
    Install or removes just by tightening or loosening of bolts. No need to hassle with adjusting keyways and thermal fittings.
  • Options to Fit Every Application
    Stainless Steel and electroless nickle plating options are offered for standard models. Both are highly durable in corrosive or clean room environments.