Tsubaki Brasil Equipamentos Industriais LTDA
Rua Dom Bernardo Nogueira, 55
CEP 04134-000
São Paulo, SP

Telefone: 55-11-3253-5656
E-mail: tsubaki@tsubaki.ind.br
Website: tsubaki.ind.br
Print Back
This chain consists of two parallel strands of RS40 chain with 3/4" diameter live tubular rollers on 1" spacing. The chains can be placed at the end or any intermediate point of a line where variations in speed or stoppage of conveyed goods may occur. Placed next to slicing or wrapping machines, they act as accumulators. Each chain is assembled with connecting pins acting as tie bars every 12". The pins have milled flats and fit into a D- shaped hole in the link plate to prevent pin rotation and give longer life. Chains are furnished in ten-foot sections. The tubular rollers rotate on either oil-impregnated iron or plastic bearings. Removable two-pitch connecting links are available.
Unit of Measure

Specifications

Chain Pitch_SYN

 N/A 0.500 in

Nominal Width

 N/A 15.000 in

Roller Width_SYN

 N/A 14.250 in

B - Overall Riveted

 N/A 15.440 in

Pin Overall Length_SYN

 N/A 15.510 in

D - Roller C.L. to C.L.

 N/A 14.812 in

Chain Type_SYN

 N/A RS40

Approx. Weight

 N/A 5.30 lbs/ft

Information

Information

 N/A Chains, connecting links and rollers are also available plated or in stainless steel. Either a plastic or an oil-impregnated bearing must also be specified. Chains and connecting links are ordered separately. One connecting pin is supplied with each chain section or connecting link. Additional pins may be ordered separately. Specify chain number and the material/bearing combination desired.