Tsubaki Brasil Equipamentos Industriais LTDA
Rua Dom Bernardo Nogueira, 55
CEP 04134-000
São Paulo, SP

Telefone: 55-11-3253-5656
E-mail: tsubaki@tsubaki.ind.br
Website: tsubaki.ind.br
Print Back
Super Series
The dimensions of Super Series Chain are identical to those of ASME/ANSI standard roller chain. Super Series Chain has a wider waist link plate than our standard chain and special manufacturing techniques are used to produce the pitch holes. After heat treatment, the holes are then ball drifted for greater fatigue strength. The pins are thru hardened for greater shock resistance. Because of this, Super Series Chain has a Maximum Allowable Load 25-30% higher than our standard RS roller chain.
Unit of Measure

Specifications

ANSI No.

 N/A 80

Chain Construction_SYN

 N/A Riveted

Chain Type_SYN

 N/A Double

Chain Pitch_SYN

 N/A 1.000 in

Roller Diameter_SYN

 N/A 0.625 in
Inside Width_SYN1 N/A 0.625 in

C - Transverse Pitch

 N/A 1.153 in

Average Tensile Strength

 N/A 38300 lb

Rated Working Load_SYN

 N/A 7100 lb

UPC Code

 N/A 097039798053

Link Plate

Link Plate Thickness_SYN

 N/A 0.125 in

Link Plate Height_SYN

 N/A 0.949 in

h - Link Plate

 N/A 0.819 in

Pin Specifications

Pin Diameter_SYN

 N/A 0.312 in

L1

 N/A 1.217 in

L2

 N/A 1.335 in
  • 1 Width between roller link plates (W) is slightly narrower than ANSI standard, however this chain runs on standard sprockets.