Print Back
Super-H Series
Super-H Series Chain has the same wide waist as Super Series. The link plate thickness is identical to those of the ASME/ANSI Heavy Series roller chains. The same special manufacturing techniques used in Super Series Chain are used to produce the pitch holes. The pins are thru hardened. Because of this, Super-H Series Chain has an even higher Maximum Allowable Load than the Super Series.
Unit of Measure

Specifications

ANSI No.

N/A 80

Chain Construction_SYN

N/A Cottered

Chain Type_SYN

N/A Triple

Chain Pitch_SYN

N/A 1.000 in

Roller Diameter_SYN

N/A 0.625 in
Inside Width_SYN1 N/A 0.625 in

C - Transverse Pitch

N/A 1.283 in

Average Tensile Strength

N/A 66100 lb

Rated Working Load_SYN

N/A 11570 lb

Link Plate

Link Plate Thickness_SYN

N/A 0.156 in

Link Plate Height_SYN

N/A 0.949 in

h - Link Plate

N/A 0.819 in

Pin Specifications

Pin Diameter_SYN

N/A 0.312 in

L1

N/A 1.998 in

L2

N/A 2.120 in
  • 1 Width between roller link plates (W) is slightly narrower than ANSI standard, however this chain runs on standard sprockets.