Item # BS360F, BS - 360 mm Bore Backstop On Tsubaki Brasil Equipamentos Industriais Ltda

Tsubaki’s new BS-F Series backstops are designed for simple, drop-in installation to all major competitive external, low-speed backstop products. These backstops use a unique labyrinth seal design for maximum life with minimal maintenance. With Tsubaki’s innovative design features, our backstops ensure efficient and dependable operation in the harshest environments.

TYPICAL APPLICATIONS

Mining (Coal, Copper, Potash) - used in inclined conveyors and bucket elevators for transporting raw

Mining (Coal, Copper, Potash) - used in inclined conveyors and bucket elevators for transporting raw materials.
Power Generating Plants - used in inclined conveyors to transfer coal from the stockpile to the boiler rooms.
Cement Plants - used in bucket elevators and inclined conveyors for moving limestone and clay to crushers and silos.

COMMON INDUSTRIES
MINING
POWER GENERATING PLANTS
CEMENT
PORTS

INNOVATIVE FEATURES:
NON-ROLLOVER CAM

Provides higher torque ratings than the leading competitors due to the larger profile and greater contact area.
Improves performance and prevents costly and potentially dangerous rollover.

SPECIAL LABYRINTH SEAL

New seal design prevents the ingress of dust and other contaminants typically found in mining and cement plants, which extends the life of the lubricant.
Minimizes heat generation and provides trouble-free service with minimal scheduled maintenance.

Superior Performance in the Harshest Environments

GREASE LUBRICATION

Offers synthetic grease lubrication in a sealed backstop design.
Breather element is eliminated.
No need to monitor oil levels, refill the backstop or worry about moisture in the lubricant.
Provides trouble-free performance with minimized maintenance requirements.

DROP IN DESIGN

Tsubaki offers the narrowest backstop with an I-beam torque arm.
Quick and easy field replacement. Drop in compatible with most competitive products.

3 STEP
EASY CONNECTION
Step 1: Insert I-beam torque arm into clutch
Step 2: Insert lock pins through flange plate and secure torque arm
Step 3: Insert retaining pins into lock pins

less

Unit of Measure

Specifications

Bore Range - Max.	N/A 14.170 in360.00 mm
Bore Range - Min.	N/A 9.840 in250.00 mm
Torque	N/A 360000 lb·ft489000 N·m
Inner Race Overrunning [Max]	N/A 100 rpm
Drag Torque	N/A 115.710 lb·ft157.00 N·m
A	N/A 11.500 in292.00 mm
B	N/A 36.610 in930.00 mm
C	N/A 10.940 in278.00 mm
D	N/A 23.030 in585.00 mm
E	N/A 19.290 in490.00 mm
F	N/A 11.260 in286.00 mm
G	N/A 0.160 in4.00 mm
H	N/A 13.580 in345.00 mm
J	N/A 100.000 in2540.00 mm
K	N/A 17.990 in457.00 mm
L	N/A 5.980 in152.00 mm
Amount of grease	N/A 4.180 lb1.900 kg
Weight - With Torque Arm - Min. Bore	N/A 4114.000 lb1870.000 kg
Weight	N/A 3850.000 lb1750.000 kg
Weight - Without Torque Arm - Min. Bore	N/A 3476.000 lb1580.000 kg
Weight - Without Torque Arm - Max.. Bore	N/A 3212.000 lb1460.000 kg

Specifications

Bore Range - Max.

Bore Range - Min.

Torque

Inner Race Overrunning [Max]

Drag Torque

A

B

C

D

E

F

G

H

J

K

L

Amount of grease

Weight - With Torque Arm - Min. Bore

Weight

Weight - Without Torque Arm - Min. Bore

Weight - Without Torque Arm - Max.. Bore