Tsubaki Brasil Equipamentos Industriais LTDA
Rua Dom Bernardo Nogueira, 55
CEP 04134-000
São Paulo, SP

Telefone: 55-11-3253-5656
E-mail: tsubaki@tsubaki.ind.br
Website: tsubaki.ind.br
Print Back
BR-HT is mainly used in backstop applications as an integral part of a gear reducer. Prevention of reverse rotation for inclined conveyor and bucket elevator are typical application BR-HT assures not only the immediate backstop function under high torque, but also long service life by the “lift-off” design. In addition, installation on the high speed shaft with low torque enables selection of more compact models with resulting lower cost.
Unit of Measure

Specifications

UPC Code

 N/A 097039688453

Torque

 N/A 129810.6 lb·ft176000.0 N·m

Inner Race Overrunning [Min]

 N/A 185 rpm

Inner Race Overrunning [Max]

 N/A 1100 rpm

Engagement [Max]

 N/A 110 rpm

Bore Size

 N/A 9.449 in240.00 mm

Width

 N/A 9.449 in240.00 mm

B1

 N/A 9.449 in240.00 mm

Outside Diameter

 N/A 20.866 in530.00 mm

D

 N/A 15.354 in390.00 mm

E

 N/A 12.717 in323.00 mm

Bolt Circle Diameter

 N/A 17.323 in440.00 mm

Q-R Mounting Holes Quantity - Size

 N/A 24-M30

S-T Removed Holes Quantity - Size

 N/A 2-M30

F

 N/A 6.535 in166.00 mm

Weight

 N/A 547.800 lb249.000 kg

H

 N/A 14.173 in360.00 mm

M

 N/A 1.378 in35.00 mm

N

 N/A 0.118 in3.00 mm