Tsubaki Brasil Equipamentos Industriais LTDA
Rua Dom Bernardo Nogueira, 55
CEP 04134-000
São Paulo, SP

Telefone: 55-11-3253-5656
E-mail: tsubaki@tsubaki.ind.br
Website: tsubaki.ind.br
Print Back
BR-HT is mainly used in backstop applications as an integral part of a gear reducer. Prevention of reverse rotation for inclined conveyor and bucket elevator are typical application BR-HT assures not only the immediate backstop function under high torque, but also long service life by the “lift-off” design. In addition, installation on the high speed shaft with low torque enables selection of more compact models with resulting lower cost.
Unit of Measure

Specifications

UPC Code

 N/A 097039688323

Torque

 N/A 51629.2 lb·ft70000.0 N·m

Inner Race Overrunning [Min]

 N/A 230 rpm

Inner Race Overrunning [Max]

 N/A 1100 rpm

Engagement [Max]

 N/A 110 rpm

Bore Size

 N/A 8.661 in220.00 mm

Width

 N/A 4.724 in120.00 mm

B1

 N/A 4.724 in120.00 mm

Outside Diameter

 N/A 18.504 in470.00 mm

D

 N/A 14.173 in360.00 mm

E

 N/A 11.535 in293.00 mm

Bolt Circle Diameter

 N/A 16.142 in410.00 mm

Q-R Mounting Holes Quantity - Size

 N/A 24-M20

S-T Removed Holes Quantity - Size

 N/A 2-M20

F

 N/A 3.268 in83.00 mm

Weight

 N/A 220.000 lb100.000 kg

H

 N/A 12.992 in330.00 mm

M

 N/A 0.650 in16.50 mm

N

 N/A 0.079 in2.00 mm