Tsubaki Brasil Equipamentos Industriais LTDA
Rua Dom Bernardo Nogueira, 55
CEP 04134-000
São Paulo, SP

Telefone: 55-11-3253-5656
E-mail: tsubaki@tsubaki.ind.br
Website: tsubaki.ind.br
Print Back
BR-HT is mainly used in backstop applications as an integral part of a gear reducer. Prevention of reverse rotation for inclined conveyor and bucket elevator are typical application BR-HT assures not only the immediate backstop function under high torque, but also long service life by the “lift-off” design. In addition, installation on the high speed shaft with low torque enables selection of more compact models with resulting lower cost.
Unit of Measure

Specifications

UPC Code

 N/A 097039688026

Torque

 N/A 94407.7 lb·ft128000.0 N·m

Inner Race Overrunning [Min]

 N/A 210 rpm

Inner Race Overrunning [Max]

 N/A 1300 rpm

Engagement [Max]

 N/A 100 rpm

Bore Size

 N/A 7.283 in185.00 mm

Width

 N/A 9.449 in240.00 mm

B1

 N/A 9.449 in240.00 mm

Outside Diameter

 N/A 16.732 in425.00 mm

D

 N/A 12.205 in310.00 mm

E

 N/A 9.567 in243.00 mm

Bolt Circle Diameter

 N/A 14.567 in370.00 mm

Q-R Mounting Holes Quantity - Size

 N/A 24-M24

S-T Removed Holes Quantity - Size

 N/A 2-M24

F

 N/A 7.559 in192.00 mm

Weight

 N/A 358.600 lb163.000 kg

H

 N/A 11.024 in280.00 mm

M

 N/A 0.866 in22.00 mm

N

 N/A 0.079 in2.00 mm