Tsubaki Brasil Equipamentos Industriais LTDA
Rua Dom Bernardo Nogueira, 55
CEP 04134-000
São Paulo, SP

Telefone: 55-11-3253-5656
E-mail: tsubaki@tsubaki.ind.br
Website: tsubaki.ind.br
Print Back
BR-HT is mainly used in backstop applications as an integral part of a gear reducer. Prevention of reverse rotation for inclined conveyor and bucket elevator are typical application BR-HT assures not only the immediate backstop function under high torque, but also long service life by the “lift-off” design. In addition, installation on the high speed shaft with low torque enables selection of more compact models with resulting lower cost.

Notes:
Keyway No Mark on Bore Size...ISOR773 DIN6885.1
Overrunning speed of inner race should not be below under continuous operation.
Engagement speed must not be exceeded when transmitting torque.
Unit of Measure

Specifications

UPC Code

 N/A 097039685476

Torque

 N/A 77.4 lb·ft105.0 N·m

Inner Race Overrunning [Min]

 N/A 880 rpm

Inner Race Overrunning [Max]

 N/A 3600 rpm

Engagement [Max]

 N/A 550 rpm

Bore Size

 N/A 0.787 in20.00 mm

Width

 N/A 0.945 in24.00 mm

B1

 N/A 0.984 in25.00 mm

Outside Diameter

 N/A 3.346 in85.00 mm

D

 N/A 2.165 in55.00 mm

E

 N/A 1.181 in30.00 mm

Bolt Circle Diameter

 N/A 2.756 in70.00 mm

Q-R Mounting Holes Quantity - Size

 N/A 6-M6

S-T Removed Holes Quantity - Size

 N/A 2-M6

F

 N/A 0.669 in17.00 mm

Weight

 N/A 1.760 lb0.800 kg

H

 N/A 1.772 in45.00 mm

M

 N/A 0.118 in3.00 mm

N

 N/A 0.039 in1.00 mm