Tsubaki Brasil Equipamentos Industriais LTDA
Rua Dom Bernardo Nogueira, 55
CEP 04134-000
São Paulo, SP

Telefone: 55-11-3253-5656
E-mail: tsubaki@tsubaki.ind.br
Website: tsubaki.ind.br
Print Back
  • Does not damage conveyed materials
  • Transfers materials smoothly to other lines
  • Wide selection available in a variety of designs
  • Easy to assemble and disassemble
  • RT type Roller Table chain provides a low friction alternative to table top chain
  • ST type Roller Table chain allows your product to be loaded and unloaded at right angles to the conveyor flow
  • Standard sprockets can be used

Maximum allowable conveying load varies depending upon the width of the roller table and the machine length.
Please use sprockets that have more than 23 teeth.
The special attachment is bent to height of roller
Plastic roller (gray)
Stay pin (pin does not rotate)
Roller Table ST type
Roller Table ST type-2
Unit of Measure
Items Roller Table ST type
ST404SS
Roller Table ST Type 		Roller Table ST type
ST406SS
Roller Table ST Type 		Roller Table ST type
ST408SS
Roller Table ST Type 		Roller Table ST type
ST410SS
Roller Table ST Type 		Roller Table ST type
ST412SS
Roller Table ST Type
Chain Pitch_SYN N/A 0.500 in
Inside Width_SYN1 N/A 0.313 in
Roller Diameter_SYN N/A 0.313 in
h1 - Attachment Height N/A 0.224 in
h2 - Link Plate Height N/A 0.276 in
N N/A 0.961 in
T1 N/A 0.047 in
T2 N/A 0.059 in
d1 - Pin Diameter N/A 0.154 in
R2 - Plastic Roller Diameter N/A 0.472 in
L2 N/A 0.984 in
Maximum Allowable Conveying Load N/A 51 lb/ft²
C1 N/A 3.984 in N/A 5.953 in N/A 7.921 in N/A 9.890 in N/A 11.858 in
C2 N/A 5.433 in N/A 7.402 in N/A 9.370 in N/A 11.339 in N/A 13.307 in
C3 N/A 4.551 in N/A 6.520 in N/A 8.488 in N/A 10.457 in N/A 12.425 in
L1 N/A 5.339 in N/A 7.307 in N/A 9.276 in N/A 11.244 in N/A 13.213 in
  • 1 Width between roller link plates (W) is slightly narrower than ANSI standard, however this chain runs on standard sprockets.