Tsubaki Brasil Equipamentos Industriais Ltda - Super Series Chains

Super Series
The dimensions of Super Series Chain are identical to those of ASME/ANSI standard roller chain. Super Series Chain has a wider waist link plate than our standard chain and special manufacturing techniques are used to produce the pitch holes. After heat treatment, the holes are then ball drifted for greater fatigue strength. The pins are thru hardened for greater shock resistance. Because of this, Super Series Chain has a Maximum Allowable Load 25-30% higher than our standard RS roller chain.

Unit of Measure

Items	80SUPERRB Super Series Chains	100SUPERRB Super Series Chains	120SUPERRB Super Series Chains	140SUPERRB Super Series Chains	160SUPERRB Super Series Chains
ANSI No.	N/A 80	N/A 100	N/A 120	N/A 140	N/A 160
Chain Construction_SYN	N/A Riveted
Chain Type_SYN	N/A Single
Chain Pitch_SYN	N/A 1.000 in	N/A 1.250 in	N/A 1.500 in	N/A 1.750 in	N/A 2.000 in
Roller Diameter_SYN	N/A 0.625 in	N/A 0.750 in	N/A 0.875 in	N/A 1.000 in	N/A 1.125 in
Inside Width_SYN¹	N/A 0.625 in	N/A 0.750 in	N/A 1.000 in	N/A 1.000 in	N/A 1.250 in
Link Plate Thickness_SYN	N/A 0.125 in	N/A 0.156 in	N/A 0.187 in	N/A 0.219 in	N/A 0.250 in
Link Plate Height_SYN	N/A 0.949 in	N/A 1.185 in	N/A 1.425 in	N/A 1.661 in	N/A 1.898 in
h - Link Plate	N/A 0.819 in	N/A 1.024 in	N/A 1.228 in	N/A 1.433 in	N/A 1.638 in
Pin Diameter_SYN	N/A 0.312 in	N/A 0.375 in	N/A 0.437 in	N/A 0.500 in	N/A 0.562 in
L1	N/A 0.640 in	N/A 0.778 in	N/A 0.980 in	N/A 1.059 in	N/A 1.254 in
L2	N/A 0.758 in	N/A 0.900 in	N/A 1.138 in	N/A 1.248 in	N/A 1.451 in
C - Transverse Pitch	N/A 1.153 in	N/A 1.408 in	N/A 1.789 in	N/A 1.924 in	N/A 2.305 in
Average Tensile Strength	N/A 19100 lb	N/A 28600 lb	N/A 41800 lb	N/A 55100 lb	N/A 70500 lb
Rated Working Load_SYN	N/A 4180 lb	N/A 6830 lb	N/A 8810 lb	N/A 12100 lb	N/A 15800 lb
¹ Width between roller link plates (W) is slightly narrower than ANSI standard, however this chain runs on standard sprockets.