Tsubaki Brasil Equipamentos Industriais Ltda - Heavy Series Chains

Heavy Series roller chains differ from the ASME/ANSI standard series in the extra thickness of the link plates and the extra length of the pins. These link plates have the same thickness as the link plates of ASME/ANSI chains having the next larger pitch. The thicker link plates provide greater capacity (approximately 10%) for absorbing shock loads. These chains are suitable in situations where the load is heavy or operating conditions are severe.

Unit of Measure

Items	60HRB Heavy Series Chains	80HRB Heavy Series Chains	100HRB Heavy Series Chains	120HRB Heavy Series Chains	140HRB Heavy Series Chains
ANSI No.	N/A 60	N/A 80	N/A 100	N/A 120	N/A 140
Chain Pitch_SYN	N/A 0.750 in	N/A 1.000 in	N/A 1.250 in	N/A 1.500 in	N/A 1.750 in
Roller Diameter_SYN	N/A 0.469 in	N/A 0.625 in	N/A 0.750 in	N/A 0.875 in	N/A 1.000 in
Inside Width_SYN¹	N/A 0.500 in	N/A 0.625 in	N/A 0.750 in	N/A 1.000 in	N/A 1.000 in
Link Plate Thickness_SYN	N/A 0.125 in	N/A 0.156 in	N/A 0.187 in	N/A 0.219 in	N/A 0.250 in
Link Plate Height_SYN	N/A 0.713 in	N/A 0.949 in	N/A 1.185 in	N/A 1.425 in	N/A 1.661 in
h - Link Plate	N/A 0.614 in	N/A 0.819 in	N/A 1.024 in	N/A 1.228 in	N/A 1.433 in
Pin Diameter_SYN	N/A 0.234 in	N/A 0.312 in	N/A 0.375 in	N/A 0.437 in	N/A 0.500 in
Number of Strands_SYN	N/A 1
L1	N/A 0.583 in	N/A 0.720 in	N/A 0.858 in	N/A 1.061 in	N/A 1.138 in
L2	N/A 0.669 in	N/A 0.823 in	N/A 0.965 in	N/A 1.203 in	N/A 1.303 in
C - Transverse Pitch	N/A 1.028 in	N/A 1.283 in	N/A 1.539 in	N/A 1.924 in	N/A 2.055 in
Chain Construction_SYN	N/A Riveted
Average Tensile Strength	N/A 9920 lb	N/A 17640 lb	N/A 26460 lb	N/A 37480 lb	N/A 48510 lb
Rated Working Load_SYN	N/A 2200 lb	N/A 3630 lb	N/A 5510 lb	N/A 7270 lb	N/A 9590 lb
Strand	N/A Single
¹ Width between roller link plates (W) is slightly narrower than ANSI standard, however this chain runs on standard sprockets.