| Items |
 TSBSCB06 TSBSC Shock Relay for Overload Protection |
TSBSCB34 TSBSC Shock Relay for Overload Protection |
TSBSCB60 TSBSC Shock Relay for Overload Protection |
TSBSCS06 TSBSC Shock Relay for Overload Protection |
TSBSCS34 TSBSC Shock Relay for Overload Protection |
|||||
| Type | All-in One Type | All-in One Type | All-in One Type | Panel Mount Type | Panel Mount Type | |||||
| Max Amperage | 05 | 30 | 60 | 100 | 200 | |||||
| Amperage Range | 0.15 to 6.4 A | 3 to 14 A | 10 to 60 A | 12 to 100 A | 24 to 200 A | |||||
| Motor HP 230 VAC | 1/16 to 2 hp | 1 to 10 hp | 5 to 25 hp | 5 to 40 hp | 10 to 75 hp | |||||
| Motor HP 460 VAC | 1/8 to 5 hp | 2 to 25 hp | 10 to 50 hp | 10 to 75 hp | 20 to 150 hp | |||||
| Mounting Type | Panel mounting with remote display option | |||||||||
| Electrical Life | Activation 100,000times at rated load cycles | |||||||||
| Ambient Humidity | 30 to 85%RH (No dew condensation) % | |||||||||
| Start Time [Min] | 0.2 s | |||||||||
| Start Time [Max] | 12.0 s | |||||||||
| Shock Time [Min] | 0.2 s | |||||||||
| Shock Time [Max] | 0.5 s | |||||||||
| Operation Frequency | 20 to 200 Hz | |||||||||
| Maximum Motor Voltage | AC600V 50/60Hz | |||||||||
| Operation Power | 100 to 240 VAC +/- 10%, 50/60 Hz | |||||||||
| Current detection accuracy | +/- 5% (In case of commercial power source) | |||||||||
| Time detection accuracy | +/- 5 % | |||||||||
| Under current | 0.2 to 5 s | |||||||||
| Lock when starting up | Set at 2 to 8 times of overcurrent setting value (OFF: No action) Trip after Star t time + 0.2s when star ting up. | |||||||||
| Lock when operating | Set at 1.5 to 8 times of overcurrent setting value (OFF: No action), trip at 0.2 to 5s. | |||||||||
| Phase-reversal | Trip within 0.15s, (OFF: No action) | |||||||||
| Phase loss | Trip at 0.5 to 5s (OFF: No action) | |||||||||
| Imbalance | Trip at 1 to 10s (OFF: No action) when setting at 10 to 50% | |||||||||
| Alarm | Output when A, F and H are set (OFF: No action) | |||||||||
| Running hour | Trip when 10 to 9990hr is set (OFF: No action) | |||||||||
| Fail-safe | Activated when setting ON (Conducting normally: Excited, Trip: Non-excited) | |||||||||
| Rated load | 3A, 250VAC | |||||||||
| Minimum allowable load | DC24V, 4mA | |||||||||
| Contact arrangement | OC:1c,AL/UC/TO:1a | |||||||||
| Self-holding | E-r: Manual release or reset of power source, H-r: Only manual release | |||||||||
| Auto-reset | A-r: Auto-reset and set the return time at 0.2s to 20min | |||||||||
| Analog output | Analog output 4 to 20mA DC Output (OFF: No action) Allowable load resistance: 100O and below | |||||||||
| Communication output | RS485/Modbus | |||||||||
| Insulation between case and circuit | DC500V, 10MO | |||||||||
| Dielectric strength voltage between housing-circuit | 2000VAC 60Hz 1min. | |||||||||
| Dielectric strength voltage between relay contacts | 1000VAC 60Hz 1min. | |||||||||
| Location | Indoors, where it will not get wet | |||||||||
| Ambient temperature | -20 to 60 ºC | |||||||||
| Ambient humidity | 30 to 85%RH (no dew condensation) | |||||||||
| Altitude | 2000 m | |||||||||
| Atmosphere | No corrosive gas, oil-mist or dust | |||||||||
| Vibration | 5.9 m/s² | |||||||||
| Power consumption | 7.0 VA | |||||||||
| Weight | 0.30 kg | |||||||||
|
|
||||||||||
