U.S. Tsubaki offers the most complete line of QD® and TAPER-LOCK weld-on hubs for insertion and welding to produce “B” style sprockets, sheaves, and other applications without hub protrusion. To provide greater strength for this type of shaft-locking mechanism and to reduce heat distortion caused by welding, these hubs are dimensionally the same as our sprocket items. Special dimensional hubs are available per your specifications on a made-to-order basis. All U.S. Tsubaki hubs are made from steel bar stock (not powdered or sintered metal). The QD and TAPER-LOCK weld-on hubs listed below include appropriate tapered bores and mounting holes.
TAPER-LOCK® is a registered trademark of Rockwell Automation.
TAPER-LOCK® is a registered trademark of Rockwell Automation.
Unit of Measure
Specifications
Weight_SYN |
N/A 0.800 lb |
Bushing Series_SYN |
N/A 1610 |
Flange Outside Diameter_SYN |
N/A 3.000 in |
Pilot Diameter_SYN |
N/A 2.875 in |
Total Length_SYN |
N/A 1.000 in |
T |
N/A 0.250 in |
Information |
N/A TAPER-LOCK type W weld-on hubs are designed for use in applications such as welding to plate sprockets, pulleys, and agitators. They are made of steel, drilled, tapped, and taper bored for TAPER-LOCK bushings. |
UPC Code |
N/A 097039387103 |
