Metric bore sizes are available upon request and are subject to an alteration charge shown on discount multiplier sheets.

All TAPER-LOCK Bushings are available in steel from stock.
Stainless steel bushings are available on a quoted basis.
Unit of Measure

Specifications

Bushing Series_SYN

2012
Bore Range_SYN1 0.500 to 2.000 in

A

2.750 in

Overall Length_SYN

1.250 in

Bolt Circle Diameter_SYN

2.630 in
Screw Size_SYN2 7/16 x 7/8 in
L - Short Hex Key3 1.562 in
L - Standard Key4 0.938 in
M - Short Hex Key5 2.000 in
M - Key6 1.375 in

Weight_SYN

1.400 lb
  • 1 All bore ranges available in 1/16th inch increments.
  • 2 2 Required
  • 3 Space required to tighten bushing. Also space required to loosen screws to permit removal of hub by puller.
  • 4 Space required to tighten bushing. Also space required to loosen screws to permit removal of hub by puller.
    Standard hex key cut to minimum usable length.
  • 5 Space required to remove bushing using jackscrews - no puller required.
  • 6 Space required to remove bushing using jackscrews - no puller required.
    Standard hex key cut to minimum usable length.