304 SS SERIES
SS Series chains are made completely of 304 stainless steel. SS Series has an excellent resistance to corrosion & temperature extremes. It is generally considered non-magnetic, although some permeability can be found in these chains. This is caused by the cold working of the components during the manufacturing process. If more complete non-magnetic permeability is required, we suggest our NS Series.
600 Series stainless steel chains are also available.
All dimensions are nominal values and for reference only
SS Series chains are made completely of 304 stainless steel. SS Series has an excellent resistance to corrosion & temperature extremes. It is generally considered non-magnetic, although some permeability can be found in these chains. This is caused by the cold working of the components during the manufacturing process. If more complete non-magnetic permeability is required, we suggest our NS Series.
600 Series stainless steel chains are also available.
All dimensions are nominal values and for reference only
Unit of Measure
Specifications
Chain Type_SYN |
N/A RS Double Pitch Drive |
Chain Construction_SYN |
N/A Cottered |
Material_SYN |
N/A 304 Stainless Steel |
ANSI No. |
N/A 80 |
Chain Pitch_SYN |
N/A 2.000 in |
Roller Diameter_SYN |
N/A 0.625 in |
| Inside Width_SYN1 | N/A 0.625 in |
Number of Links per 10 ft |
N/A 60 |
Rated Working Load_SYN |
N/A 397 lb |
- 1 Width between roller link plates (W) is slightly narrower than ANSI standard, however this chain runs on standard sprockets.
