Request Information
  • Does not damage conveyed materials
  • Transfers materials smoothly to other lines
  • Wide selection available in a variety of designs
  • Easy to assemble and disassemble
  • RT type Roller Table chain provides a low friction alternative to table top chain
  • ST type Roller Table chain allows your product to be loaded and unloaded at right angles to the conveyor flow
  • Standard sprockets can be used

Maximum allowable conveying load varies depending upon the width of the roller table and the machine length.
Please use sprockets that have more than 23 teeth.
The special attachment is bent to height of roller
Plastic roller (gray)
Stay pin (pin does not rotate)
Unit of Measure

Common Dimensions

Chain Pitch_SYN

 N/A 0.625 in
Inside Width_SYN1 N/A 0.375 in

Roller Diameter_SYN

 N/A 0.400 in

h1 - Attachment Height

 N/A 0.280 in

h2 - Link Plate Height

 N/A 0.335 in

N

 N/A 1.201 in

T1

 N/A 0.059 in

T2

 N/A 0.079 in

d1 - Pin Diameter

 N/A 0.200 in

R2 - Plastic Roller Diameter

 N/A 0.591 in

L2

 N/A 0.984 in

Maximum Allowable Conveying Load

 N/A 72 lb/ft²

Specifications

C1

 N/A 11.858 in

C2

 N/A 13.591 in

C3

 N/A 12.559 in

L1

 N/A 13.496 in
  • 1 Width between roller link plates (W) is slightly narrower than ANSI standard, however this chain runs on standard sprockets.