Request Information
  • Most popular series world-wide
  • Easy machining of shaft and hub
  • Can use on shafts with a keyway
  • Metric size range: 19-mm thru 300-mm


For selection and application see Technical Notes download
Unit of Measure

Specifications

Inside Diameter_SYN

 N/A 7.480 in

t1 - Shaft Dia. Tolerance

 N/A -0.0028 in +0

Outside Diameter_SYN

 N/A 9.843 in

t2 - Hub Counter ID Tolerance

 N/A +0.0028 in -0

Thickness_SYN

 N/A 2.047 in

L

 N/A 1.890 in

Total Length_SYN

 N/A 2.598 in

Torque_SYN

 N/A 35108 ft·lb

Transmissible Thrust

 N/A 112640 lb

Shaft Working Pressure_SYN

 N/A 21321 psi

Hub Working Pressure_SYN

 N/A 16245 psi

Weight_SYN

 N/A 17.000 lb

UPC Code

 N/A 097039580498

Locking Bolts

Number of Screws_SYN

 N/A 20

Bolt Size_SYN

 N/A M14x45

Screw Seating Torque_SYN

 N/A 166.000 ft·lb

Features & Application

Features & Application

 N/A
  • Multipurpose
    Ideally structured and highly reliable locking device
  • Low Machining Costs
    Keyway, splines, presses and thermal fittings are not required. Optimum performance is achieved with low shaft and hub tolerances minimizing the total machining costs.
  • Easy to Install
    Install or removes just by tightening or loosening of bolts. No need to hassle with adjusting keyways and thermal fittings.
  • Options to Fit Every Application
    Stainless Steel and electroless nickle plating options are offered for standard models. Both are highly durable in corrosive or clean room environments.