Request Information
  • Most popular series world-wide
  • Easy machining of shaft and hub
  • Can use on shafts with a keyway
  • Metric size range: 19-mm thru 300-mm


For selection and application see Technical Notes download
Unit of Measure

Specifications

Inside Diameter_SYN

 N/A 5.906 in

t1 - Shaft Dia. Tolerance

 N/A -0.0025 in +0

Outside Diameter_SYN

 N/A 7.874 in

t2 - Hub Counter ID Tolerance

 N/A +0.0028 in -0

Thickness_SYN

 N/A 1.496 in

L

 N/A 1.339 in

Total Length_SYN

 N/A 1.969 in

Torque_SYN

 N/A 18218 ft·lb

Transmissible Thrust

 N/A 73920 lb

Shaft Working Pressure_SYN

 N/A 24947 psi

Hub Working Pressure_SYN

 N/A 18710 psi

Weight_SYN

 N/A 8.400 lb

UPC Code

 N/A 097039580405

Locking Bolts

Number of Screws_SYN

 N/A 18

Bolt Size_SYN

 N/A M12x35

Screw Seating Torque_SYN

 N/A 105.000 ft·lb

Features & Application

Features & Application

 N/A
  • Multipurpose
    Ideally structured and highly reliable locking device
  • Low Machining Costs
    Keyway, splines, presses and thermal fittings are not required. Optimum performance is achieved with low shaft and hub tolerances minimizing the total machining costs.
  • Easy to Install
    Install or removes just by tightening or loosening of bolts. No need to hassle with adjusting keyways and thermal fittings.
  • Options to Fit Every Application
    Stainless Steel and electroless nickle plating options are offered for standard models. Both are highly durable in corrosive or clean room environments.