Request Information
  • Most popular series world-wide
  • Easy machining of shaft and hub
  • Can use on shafts with a keyway
  • Inch size range: 3/4" thru 11-13/16"


For selection and application see Technical Notes download
Unit of Measure

Specifications

Inside Diameter_SYN

 N/A 2.375 in

t1 - Shaft Dia. Tolerance

 N/A -0.0018 in +0

Outside Diameter_SYN

 N/A 3.531 in

t2 - Hub Counter ID Tolerance

 N/A +0.0021 in -0

Thickness_SYN

 N/A 0.945 in

L

 N/A 0.827 in

Total Length_SYN

 N/A 1.260 in

Torque_SYN

 N/A 1931 ft·lb

Transmissible Thrust

 N/A 19360 lb

Shaft Working Pressure_SYN

 N/A 26590 psi

Hub Working Pressure_SYN

 N/A 17780 psi

Weight_SYN

 N/A 1.400 lb

UPC Code

 N/A 097039571427

Locking Bolts

Number of Screws_SYN

 N/A 11

Bolt Size_SYN

 N/A M8x22

Screw Seating Torque_SYN

 N/A 30.000 ft·lb

Features & Application

Features & Application

 N/A
  • Multipurpose
    Ideally structured and highly reliable locking device
  • Low Machining Costs
    Keyway, splines, presses and thermal fittings are not required. Optimum performance is achieved with low shaft and hub tolerances minimizing the total machining costs.
  • Easy to Install
    Install or removes just by tightening or loosening of bolts. No need to hassle with adjusting keyways and thermal fittings.
  • Options to Fit Every Application
    Stainless Steel and electroless nickle plating options are offered for standard models. Both are highly durable in corrosive or clean room environments.