E Series (Electro-Conductive Series)
The special plastic used in the "E" series is electro conductive and permits electrical charge. These chains are suitable for applications where there is electric noise, electric sparks, or where dust collects due to static electricity. Volume resistivity: 106Q*cm
All dimensions are nominal values and for reference only
The special plastic used in the "E" series is electro conductive and permits electrical charge. These chains are suitable for applications where there is electric noise, electric sparks, or where dust collects due to static electricity. Volume resistivity: 106Q*cm
All dimensions are nominal values and for reference only
Unit of Measure
Chain Pitch_SYN |
N/A 0.625 in |
Maximum Allowable Tension |
N/A 110 lb |
Ambient Temperature Range |
N/A -4 to 176 ºF |
Maximum Allowable Chain Speed |
N/A 200 ft/min |
Coefficient of Sliding Friction |
N/A 0.25 |
Chain Type_SYN |
N/A Electro-Conductive Series |
R |
N/A 0.400 in |
| Inside Width_SYN1 | N/A 0.375 in |
L |
N/A 0.886 in |
H1 |
N/A 0.276 in |
H2 |
N/A 0.315 in |
H |
N/A 0.591 in |
- 1 Width between roller link plates (W) is slightly narrower than ANSI standard, however this chain runs on standard sprockets.
