E Series (Electro-Conductive Series)
The special plastic used in the "E" series is electro conductive and permits electrical charge. These chains are suitable for applications where there is electric noise, electric sparks, or where dust collects due to static electricity. Volume resistivity: 106Q*cm
All dimensions are nominal values and for reference only
The special plastic used in the "E" series is electro conductive and permits electrical charge. These chains are suitable for applications where there is electric noise, electric sparks, or where dust collects due to static electricity. Volume resistivity: 106Q*cm
All dimensions are nominal values and for reference only
Unit of Measure
Chain Pitch_SYN |
N/A 0.375 in |
Maximum Allowable Tension |
N/A 30 lb |
Ambient Temperature Range |
N/A -4 to 176 ºF |
Maximum Allowable Chain Speed |
N/A 200 ft/min |
Coefficient of Sliding Friction |
N/A 0.25 |
Chain Type_SYN |
N/A Electro-Conductive Series |
R |
N/A 0.200 in |
| Inside Width_SYN1 | N/A 0.188 in |
L |
N/A 0.512 in |
H1 |
N/A 0.157 in |
H2 |
N/A 0.197 in |
H |
N/A 0.354 in |
- 1 Width between roller link plates (W) is slightly narrower than ANSI standard, however this chain runs on standard sprockets.
