Super Series
The dimensions of Super Series Chain are identical to those of ASME/ANSI standard roller chain. Super Series Chain has a wider waist link plate than our standard chain and special manufacturing techniques are used to produce the pitch holes. After heat treatment, the holes are then ball drifted for greater fatigue strength. The pins are thru hardened for greater shock resistance. Because of this, Super Series Chain has a Maximum Allowable Load 25-30% higher than our standard RS roller chain.
The dimensions of Super Series Chain are identical to those of ASME/ANSI standard roller chain. Super Series Chain has a wider waist link plate than our standard chain and special manufacturing techniques are used to produce the pitch holes. After heat treatment, the holes are then ball drifted for greater fatigue strength. The pins are thru hardened for greater shock resistance. Because of this, Super Series Chain has a Maximum Allowable Load 25-30% higher than our standard RS roller chain.
Unit of Measure
Specifications
ANSI No. |
N/A 140 |
Chain Construction_SYN |
N/A Cottered |
Chain Type_SYN |
N/A Double |
Chain Pitch_SYN |
N/A 1.750 in |
Roller Diameter_SYN |
N/A 1.000 in |
| Inside Width_SYN1 | N/A 1.000 in |
C - Transverse Pitch |
N/A 1.924 in |
Average Tensile Strength |
N/A 110200 lb |
Rated Working Load_SYN |
N/A 20610 lb |
UPC Code |
N/A 097039566157 |
- 1 Width between roller link plates (W) is slightly narrower than ANSI standard, however this chain runs on standard sprockets.
