Super-H Series
Super-H Series Chain has the same wide waist as Super Series. The link plate thickness is identical to those of the ASME/ANSI Heavy Series roller chains. The same special manufacturing techniques used in Super Series Chain are used to produce the pitch holes. The pins are thru hardened. Because of this, Super-H Series Chain has an even higher Maximum Allowable Load than the Super Series.
Unit of Measure

Specifications

ANSI No.

N/A 200

Chain Construction_SYN

N/A Cottered

Chain Type_SYN

N/A Single

Chain Pitch_SYN

N/A 2.500 in

Roller Diameter_SYN

N/A 1.562 in
Inside Width_SYN1 N/A 1.500 in

C - Transverse Pitch

N/A 3.083 in

Average Tensile Strength

N/A 134400 lb

Rated Working Load_SYN

N/A 22500 lb

UPC Code

N/A 097039184962

Link Plate

Link Plate Thickness_SYN

N/A 0.375 in

Link Plate Height_SYN

N/A 2.374 in

h - Link Plate

N/A 2.047 in

Pin Specifications

Pin Diameter_SYN

N/A 0.781 in

L1

N/A 1.689 in

L2

N/A 1.894 in
  • 1 Width between roller link plates (W) is slightly narrower than ANSI standard, however this chain runs on standard sprockets.