Super-H Series
Super-H Series Chain has the same wide waist as Super Series. The link plate thickness is identical to those of the ASME/ANSI Heavy Series roller chains. The same special manufacturing techniques used in Super Series Chain are used to produce the pitch holes. The pins are thru hardened. Because of this, Super-H Series Chain has an even higher Maximum Allowable Load than the Super Series.
Super-H Series Chain has the same wide waist as Super Series. The link plate thickness is identical to those of the ASME/ANSI Heavy Series roller chains. The same special manufacturing techniques used in Super Series Chain are used to produce the pitch holes. The pins are thru hardened. Because of this, Super-H Series Chain has an even higher Maximum Allowable Load than the Super Series.
Unit of Measure
Specifications
ANSI No. |
N/A 140 |
Chain Construction_SYN |
N/A Cottered |
Chain Type_SYN |
N/A Double |
Chain Pitch_SYN |
N/A 1.750 in |
Roller Diameter_SYN |
N/A 1.000 in |
| Inside Width_SYN1 | N/A 1.000 in |
C - Transverse Pitch |
N/A 2.055 in |
Average Tensile Strength |
N/A 114600 lb |
Rated Working Load_SYN |
N/A 21730 lb |
- 1 Width between roller link plates (W) is slightly narrower than ANSI standard, however this chain runs on standard sprockets.
