T Series
T Series chains have greater shock load resistance and higher ultimate tensile strength than comparable ASME/ANSI standard roller chains. This is accomplished by using thru hardened pins. The dimensions of the chains are identical to ASME/ANSI standard roller chains.
T Series chains have greater shock load resistance and higher ultimate tensile strength than comparable ASME/ANSI standard roller chains. This is accomplished by using thru hardened pins. The dimensions of the chains are identical to ASME/ANSI standard roller chains.
Unit of Measure
Specifications
ANSI No. |
N/A 80 |
Chain Construction_SYN |
N/A Riveted |
Chain Type_SYN |
N/A Single |
Chain Pitch_SYN |
N/A 1.000 in |
Roller Diameter_SYN |
N/A 0.625 in |
| Inside Width_SYN1 | N/A 0.625 in |
C - Transverse Pitch |
N/A 1.153 in |
Average Tensile Strength |
N/A 17600 lb |
Rated Working Load_SYN |
N/A 3300 lb |
- 1 Width between roller link plates (W) is slightly narrower than ANSI standard, however this chain runs on standard sprockets.
