Request Information
U.S. Tsubaki Bearing Bush chain virtually eliminates initial stretch. With needle bearings placed between the pin and bushing, Bearing Bush chain offers excellent wear life without lubrication. Major dimensions of the chain and attachments are the same as our ASME/ANSI standard double pitch conveyor chains. U.S. Tsubaki Bearing Bush chain works perfectly with standard over-sized roller sprockets. Bearing Bush chain is suggested for precision applications requiring accurate positioning of the conveyed material.

Note:
1. Spring clip type connecting links will be provided for CN2042, CN2052 and CN2062H.
2. Offset links are not available.
3. SS Series (SUS304) is also available.
4. Link plates can be nickel-plated.
Unit of Measure

Specifications

Chain Pitch_SYN

 N/A 2.000 in

Roller Diameter_SYN

 N/A 1.125 in
Inside Width_SYN1 N/A 0.625 in

Maximum Allowable Load

 N/A 660 lb

Maximum Allowable Roller Load

 N/A 121 lb

Link Plate

Link Plate Height_SYN

 N/A 1.378 in

h

 N/A 0.906 in

Pin Specifications

Pin Diameter_SYN

 N/A 0.312 in

L1

 N/A 0.720 in

L2

 N/A 0.823 in
  • 1 Width between roller link plates (W) is slightly narrower than ANSI standard, however this chain runs on standard sprockets.