BR-HT is mainly used in backstop applications as an integral part of a gear reducer. Prevention of reverse rotation for inclined conveyor and bucket elevator are typical application BR-HT assures not only the immediate backstop function under high torque, but also long service life by the “lift-off” design. In addition, installation on the high speed shaft with low torque enables selection of more compact models with resulting lower cost.
Unit of Measure
Specifications
UPC Code |
N/A 097039687791 |
Torque |
N/A 15120.0 lb·ft20500.0 N·m |
Inner Race Overrunning [Min] |
N/A 240 rpm |
Inner Race Overrunning [Max] |
N/A 2700 rpm |
Engagement [Max] |
N/A 130 rpm |
Bore Size |
N/A 2.756 in70.00 mm |
Width |
N/A 3.150 in80.00 mm |
B1 |
N/A 3.150 in80.00 mm |
Outside Diameter |
N/A 11.417 in290.00 mm |
D |
N/A 8.268 in210.00 mm |
E |
N/A 6.969 in177.00 mm |
Bolt Circle Diameter |
N/A 10.157 in258.00 mm |
Q-R Mounting Holes Quantity - Size |
N/A 12-M16 |
S-T Removed Holes Quantity - Size |
N/A 2-M16 |
F |
N/A 2.480 in63.00 mm |
Weight |
N/A 77.000 lb35.000 kg |
H |
N/A 7.874 in200.00 mm |
M |
N/A 0.295 in7.50 mm |
N |
N/A 0.079 in2.00 mm |
