BR-HT is mainly used in backstop applications as an integral part of a gear reducer. Prevention of reverse rotation for inclined conveyor and bucket elevator are typical application BR-HT assures not only the immediate backstop function under high torque, but also long service life by the “lift-off” design. In addition, installation on the high speed shaft with low torque enables selection of more compact models with resulting lower cost.
Unit of Measure
Specifications
UPC Code |
N/A 097039687739 |
Torque |
N/A 5162.9 lb·ft7000.0 N·m |
Inner Race Overrunning [Min] |
N/A 310 rpm |
Inner Race Overrunning [Max] |
N/A 3600 rpm |
Engagement [Max] |
N/A 160 rpm |
Bore Size |
N/A 3.740 in95.00 mm |
Width |
N/A 2.756 in70.00 mm |
B1 |
N/A 2.362 in60.00 mm |
Outside Diameter |
N/A 8.268 in210.00 mm |
D |
N/A 6.299 in160.00 mm |
E |
N/A 5.000 in127.00 mm |
Bolt Circle Diameter |
N/A 7.283 in185.00 mm |
Q-R Mounting Holes Quantity - Size |
N/A 12-M10 |
S-T Removed Holes Quantity - Size |
N/A 2-M10 |
F |
N/A 1.969 in50.00 mm |
Weight |
N/A 28.600 lb13.000 kg |
H |
N/A 5.827 in148.00 mm |
M |
N/A 0.157 in4.00 mm |
N |
N/A 0.059 in1.50 mm |
