BR-HT is mainly used in backstop applications as an integral part of a gear reducer. Prevention of reverse rotation for inclined conveyor and bucket elevator are typical application BR-HT assures not only the immediate backstop function under high torque, but also long service life by the “lift-off” design. In addition, installation on the high speed shaft with low torque enables selection of more compact models with resulting lower cost.
Unit of Measure
Specifications
UPC Code |
N/A 097039686053 |
Torque |
N/A 1069.5 lb·ft1450.0 N·m |
Inner Race Overrunning [Min] |
N/A 590 rpm |
Inner Race Overrunning [Max] |
N/A 3600 rpm |
Engagement [Max] |
N/A 280 rpm |
Bore Size |
N/A 1.772 in45.00 mm |
Width |
N/A 1.575 in40.00 mm |
B1 |
N/A 1.575 in40.00 mm |
Outside Diameter |
N/A 5.906 in150.00 mm |
D |
N/A 4.331 in110.00 mm |
E |
N/A 3.346 in85.00 mm |
Bolt Circle Diameter |
N/A 5.197 in132.00 mm |
Q-R Mounting Holes Quantity - Size |
N/A 8-M8 |
S-T Removed Holes Quantity - Size |
N/A 2-M8 |
F |
N/A 0.984 in25.00 mm |
Weight |
N/A 9.460 lb4.300 kg |
H |
N/A 4.055 in103.00 mm |
M |
N/A 0.256 in6.50 mm |
N |
N/A 0.039 in1.00 mm |
