BR-HT is mainly used in backstop applications as an integral part of a gear reducer. Prevention of reverse rotation for inclined conveyor and bucket elevator are typical application BR-HT assures not only the immediate backstop function under high torque, but also long service life by the “lift-off” design. In addition, installation on the high speed shaft with low torque enables selection of more compact models with resulting lower cost.
Unit of Measure
Specifications
UPC Code |
N/A 097039688729 |
Torque |
N/A 103258.4 lb·ft140000.0 N·m |
Inner Race Overrunning [Min] |
N/A 200 rpm |
Inner Race Overrunning [Max] |
N/A 1000 rpm |
Engagement [Max] |
N/A 95 rpm |
Bore Size |
N/A 11.811 in300.00 mm |
Width |
N/A 4.921 in125.00 mm |
B1 |
N/A 4.921 in125.00 mm |
Outside Diameter |
N/A 24.803 in630.00 mm |
D |
N/A 18.898 in480.00 mm |
E |
N/A 16.260 in413.00 mm |
Bolt Circle Diameter |
N/A 22.047 in560.00 mm |
Q-R Mounting Holes Quantity - Size |
N/A 24-M24 |
S-T Removed Holes Quantity - Size |
N/A 2-M24 |
F |
N/A 3.268 in83.00 mm |
Weight |
N/A 435.600 lb198.000 kg |
H |
N/A 18.110 in460.00 mm |
M |
N/A 0.669 in17.00 mm |
N |
N/A 0.118 in3.00 mm |
