BR-HT is mainly used in backstop applications as an integral part of a gear reducer. Prevention of reverse rotation for inclined conveyor and bucket elevator are typical application BR-HT assures not only the immediate backstop function under high torque, but also long service life by the “lift-off” design. In addition, installation on the high speed shaft with low torque enables selection of more compact models with resulting lower cost.
Unit of Measure
Specifications
UPC Code |
N/A 097039688750 |
Torque |
N/A 184390.0 lb·ft250000.0 N·m |
Inner Race Overrunning [Min] |
N/A 165 rpm |
Inner Race Overrunning [Max] |
N/A 1000 rpm |
Engagement [Max] |
N/A 85 rpm |
Bore Size |
N/A 12.598 in320.00 mm |
Width |
N/A 8.268 in210.00 mm |
B1 |
N/A 8.268 in210 mm |
Outside Diameter |
N/A 24.803 in630.00 mm |
D |
N/A 18.898 in480.00 mm |
E |
N/A 16.260 in413.00 mm |
Bolt Circle Diameter |
N/A 22.047 in560.00 mm |
Q-R Mounting Holes Quantity - Size |
N/A 24-M24 |
S-T Removed Holes Quantity - Size |
N/A 2-M24 |
F |
N/A 5.827 in148.00 mm |
Weight |
N/A 690.800 lb314.000 kg |
H |
N/A 18.110 in460.00 mm |
M |
N/A 1.142 in29.00 mm |
N |
N/A 0.118 in3.00 mm |
