BR-HT is mainly used in backstop applications as an integral part of a gear reducer. Prevention of reverse rotation for inclined conveyor and bucket elevator are typical application BR-HT assures not only the immediate backstop function under high torque, but also long service life by the “lift-off” design. In addition, installation on the high speed shaft with low torque enables selection of more compact models with resulting lower cost.
Unit of Measure
Specifications
UPC Code |
N/A 097039688538 |
Torque |
N/A 48679.0 lb·ft66000.0 N·m |
Inner Race Overrunning [Min] |
N/A 250 rpm |
Inner Race Overrunning [Max] |
N/A 1000 rpm |
Engagement [Max] |
N/A 130 rpm |
Bore Size |
N/A 10.236 in260.00 mm |
Width |
N/A 4.134 in105.00 mm |
B1 |
N/A 4.134 in105.00 mm |
Outside Diameter |
N/A 21.654 in550.00 mm |
D |
N/A 16.929 in430.00 mm |
E |
N/A 14.291 in363.00 mm |
Bolt Circle Diameter |
N/A 19.685 in500.00 mm |
Q-R Mounting Holes Quantity - Size |
N/A 16-M24 |
S-T Removed Holes Quantity - Size |
N/A 2-M24 |
F |
N/A 2.244 in57.00 mm |
Weight |
N/A 268.400 lb122.000 kg |
H |
N/A 15.748 in400.00 mm |
M |
N/A 0.866 in22.00 mm |
N |
N/A 0.118 in3.00 mm |
