BR-HT is mainly used in backstop applications as an integral part of a gear reducer. Prevention of reverse rotation for inclined conveyor and bucket elevator are typical application BR-HT assures not only the immediate backstop function under high torque, but also long service life by the “lift-off” design. In addition, installation on the high speed shaft with low torque enables selection of more compact models with resulting lower cost.
Unit of Measure
Specifications
UPC Code |
N/A 097039688347 |
Torque |
N/A 66380.4 lb·ft90000.0 N·m |
Inner Race Overrunning [Min] |
N/A 280 rpm |
Inner Race Overrunning [Max] |
N/A 1100 rpm |
Engagement [Max] |
N/A 140 rpm |
Bore Size |
N/A 8.661 in220.00 mm |
Width |
N/A 6.299 in160.00 mm |
B1 |
N/A 6.299 in160.00 mm |
Outside Diameter |
N/A 18.898 in480.00 mm |
D |
N/A 14.173 in360.00 mm |
E |
N/A 11.535 in293.00 mm |
Bolt Circle Diameter |
N/A 16.142 in410.00 mm |
Q-R Mounting Holes Quantity - Size |
N/A 18-M24 |
S-T Removed Holes Quantity - Size |
N/A 2-M24 |
F |
N/A 4.173 in106.00 mm |
Weight |
N/A 310.200 lb141.000 kg |
H |
N/A 12.992 in330.00 mm |
M |
N/A 0.984 in25.00 mm |
N |
N/A 0.079 in2.00 mm |
