BR-HT is mainly used in backstop applications as an integral part of a gear reducer. Prevention of reverse rotation for inclined conveyor and bucket elevator are typical application BR-HT assures not only the immediate backstop function under high torque, but also long service life by the “lift-off” design. In addition, installation on the high speed shaft with low torque enables selection of more compact models with resulting lower cost.
Unit of Measure
Specifications
UPC Code |
N/A 097039249203 |
Torque |
N/A 166.0 lb·ft225.0 N·m |
Inner Race Overrunning [Min] |
N/A 850 rpm |
Inner Race Overrunning [Max] |
N/A 3600 rpm |
Engagement [Max] |
N/A 400 rpm |
Bore Size |
N/A 0.787 in20.00 mm |
Width |
N/A 1.378 in35.00 mm |
B1 |
N/A 1.378 in35.00 mm |
Outside Diameter |
N/A 3.543 in90.00 mm |
D |
N/A 2.598 in66.00 mm |
E |
N/A 1.614 in41.00 mm |
Bolt Circle Diameter |
N/A 3.071 in78.00 mm |
Q-R Mounting Holes Quantity - Size |
N/A 6-M6 |
S-T Removed Holes Quantity - Size |
N/A 2-M6 |
F |
N/A 0.984 in25.00 mm |
Weight |
N/A 2.860 lb1.300 kg |
H |
N/A 2.087 in53.00 mm |
M |
N/A 0.157 in4.00 mm |
N |
N/A 0.039 in1.00 mm |
