BR-HT is mainly used in backstop applications as an integral part of a gear reducer. Prevention of reverse rotation for inclined conveyor and bucket elevator are typical application BR-HT assures not only the immediate backstop function under high torque, but also long service life by the “lift-off” design. In addition, installation on the high speed shaft with low torque enables selection of more compact models with resulting lower cost.
Unit of Measure
Specifications
UPC Code |
N/A 097039688033 |
Torque |
N/A 23601.9 lb·ft32000.0 N·m |
Inner Race Overrunning [Min] |
N/A 300 rpm |
Inner Race Overrunning [Max] |
N/A 1300 rpm |
Engagement [Max] |
N/A 160 rpm |
Bore Size |
N/A 7.087 in180.00 mm |
Width |
N/A 3.543 in90.00 mm |
B1 |
N/A 3.150 in80.00 mm |
Outside Diameter |
N/A 16.220 in412.00 mm |
D |
N/A 12.205 in310.00 mm |
E |
N/A 9.567 in243.00 mm |
Bolt Circle Diameter |
N/A 14.173 in360.00 mm |
Q-R Mounting Holes Quantity - Size |
N/A 12-M20 |
S-T Removed Holes Quantity - Size |
N/A 2-M20 |
F |
N/A 2.087 in53.00 mm |
Weight |
N/A 123.200 lb56.000 kg |
H |
N/A 11.024 in280.00 mm |
M |
N/A 0.453 in11.50 mm |
N |
N/A 0.079 in2.00 mm |
