Standard attachments are available for U.S. Tsubaki Hollow Pin chain in both single and double pitch types. Cross rods may be inserted into any link without disassembling the chain.
All dimensions are nominal values and for reference only
Request Information
Unit of Measure
Items
RS Type Hollow Pin Chain

RS Type Hollow Pin Chain
RS Type Hollow Pin Chain

RS Type Hollow Pin Chain
RS Type Hollow Pin Chain

RS Type Hollow Pin Chain
RS Type Hollow Pin Chain

RS Type Hollow Pin Chain
ANSI No. N/A 40 N/A 50 N/A 60 N/A 80
Chain Pitch_SYN N/A 0.500 in N/A 0.625 in N/A 0.750 in N/A 1.000 in
Inside Width_SYN1 N/A 0.312 in N/A 0.375 in N/A 0.500 in N/A 0.625 in
Roller Diameter_SYN N/A 0.312 in N/A 0.400 in N/A 0.469 in N/A 0.625 in
Pin Diameter_SYN N/A 0.224 in N/A 0.284 in N/A 0.330 in N/A 0.448 in
F N/A 0.157 in N/A 0.202 in N/A 0.236 in N/A 0.316 in
L1 N/A 0.315 in N/A 0.396 in N/A 0.494 in N/A 0.640 in
L2 N/A 0.374 in N/A 0.459 in N/A 0.561 in N/A 0.701 in
Link Plate Thickness_SYN N/A 0.060 in N/A 0.080 in N/A 0.094 in N/A 0.125 in
Link Plate Height_SYN N/A 0.472 in N/A 0.591 in N/A 0.713 in N/A 0.949 in
Average Tensile Strength N/A 2430 lb N/A 4410 lb N/A 5950 lb N/A 10800 lb
Rated Working Load_SYN N/A 397 lb N/A 705 lb N/A 948 lb N/A 1720 lb
  • 1 Width between roller link plates (W) is slightly narrower than ANSI standard, however this chain runs on standard sprockets.