Super-H Series
Super-H Series Chain has the same wide waist as Super Series. The link plate thickness is identical to those of the ASME/ANSI Heavy Series roller chains. The same special manufacturing techniques used in Super Series Chain are used to produce the pitch holes. The pins are thru hardened. Because of this, Super-H Series Chain has an even higher Maximum Allowable Load than the Super Series.
Request Information
Unit of Measure
Items
Super-H Series Chains

Super-H Series Chains
Super-H Series Chains

Super-H Series Chains
Super-H Series Chains

Super-H Series Chains
Super-H Series Chains

Super-H Series Chains
Super-H Series Chains

Super-H Series Chains
ANSI No. N/A 80 N/A 100 N/A 120 N/A 140 N/A 160
Chain Construction_SYN N/A Cottered
Chain Type_SYN N/A Single
Chain Pitch_SYN N/A 1.000 in N/A 1.250 in N/A 1.500 in N/A 1.750 in N/A 2.000 in
Roller Diameter_SYN N/A 0.625 in N/A 0.750 in N/A 0.875 in N/A 1.000 in N/A 1.125 in
Inside Width_SYN1 N/A 0.625 in N/A 0.750 in N/A 1.000 in N/A 1.000 in N/A 1.250 in
Link Plate Thickness_SYN N/A 0.156 in N/A 0.187 in N/A 0.219 in N/A 0.250 in N/A 0.281 in
Link Plate Height_SYN N/A 0.949 in N/A 1.185 in N/A 1.425 in N/A 1.661 in N/A 1.898 in
h - Link Plate N/A 0.819 in N/A 1.024 in N/A 1.228 in N/A 1.433 in N/A 1.638 in
Pin Diameter_SYN N/A 0.312 in N/A 0.375 in N/A 0.437 in N/A 0.500 in N/A 0.562 in
L1 N/A 0.720 in N/A 0.858 in N/A 1.061 in N/A 1.138 in N/A 1.337 in
L2 N/A 0.823 in N/A 0.965 in N/A 1.203 in N/A 1.303 in N/A 1.514 in
C - Transverse Pitch N/A 1.283 in N/A 1.539 in N/A 1.924 in N/A 2.055 in N/A 2.437 in
Average Tensile Strength N/A 22000 lb N/A 32600 lb N/A 44000 lb N/A 57300 lb N/A 72700 lb
Rated Working Load_SYN N/A 4630 lb N/A 7270 lb N/A 9480 lb N/A 12780 lb N/A 16500 lb
  • 1 Width between roller link plates (W) is slightly narrower than ANSI standard, however this chain runs on standard sprockets.